
Bar stools
Swivel Ladder-Back Bar Stool in Metal
- Metal frame
- 17" W x 20 1/4" D x 42" H
- Indoor use
For small, bright rooms
A guest turns toward the counter to collect a cup, then back toward the window. A swivel can make that movement easier, but the back and arms still need room to turn.

Bar stools

Bar stools

Bar stools

Bar stools

Bar stools

Bar stools

Bar stools

Bar stools

Bar stools

Bar stools

Bar stools

Bar stools

Bar stools

Bar stools

Bar stools

Bar stools

Bar stools

Bar stools

Bar stools

Bar stools

Bar stools

Bar stools

Bar stools

Bar stools

Bar stools

Bar stools

Bar stools

Bar stools

Bar stools

Bar stools

Bar stools

Bar stools

Bar stools

Bar stools

Bar stools

Bar stools
A guest turns toward the counter to collect a cup, then back toward the window. A swivel can make that movement easier, but the back and arms still need room to turn. Compare the 87 stools here by their listed mechanism, seat height, and outside width before counting places along the ledge.
A swivel changes where the guest faces; it does not remove the space needed behind the stool. Draw the occupied seat and the turning back on your plan. Check the route to the pickup shelf with the stool facing sideways, where an arm or corner of the back may reach farther into the room.
Start with 24 to 30 inches between stool centers. Along a 120-inch ledge, that gives an early count of four or five positions. The ends, nearby door, and turning clearance can reduce it. Walk the route before fixing the count in a cafe plan.
Surface height comes first. A bar around 40 to 42 inches high is commonly paired with seats near 29 to 31 inches; a counter around 34 to 36 inches calls for a lower seat. Use the actual stool figure and inspect the underside of the ledge, where an apron can reduce knee room.
The ladder-back swivel stool lists outside dimensions of 17" W x 20 1/4" D x 42" H. That final figure is the overall height, not the seat height. Keep those measurements separate when comparing it with counter stools. If the counter is already installed, measure from the finished floor rather than relying on an old drawing.
The group includes metal and wood frames, with vinyl, wood, fabric, and metal among the seat materials. Read the selected product's choices rather than assuming every finish comes on every stool. Upholstery changes the cleaning routine, and a padded back changes the part staff wipe between guests.
Check the exact swivel configuration on the product page too. A category narrows the search; the chosen version decides what goes into the basket. Compare backless stools if the back is the part crowding the route, but measure how far the occupied seat still projects.
These listings are for indoor use. A sidewalk ledge needs a separate look at patio bar stools. Before ordering, ask for finish samples and try the seat color beside the actual counter under the shop's lighting.
Related reading