Kova Armchair in Metal with Clear Coat

The Kova Armchair in Metal with Clear Coat is worth a look when you need an upholstered back armchair for hotel bars, fine dining rooms, and lounges. Keep this indoor model off the sidewalk and inside. Put 24 1/2" W x 25" D x 32 1/2" H on your room sketch for this piece. Use about 29 to 30 inches for the dining surface in your first height check, followed by the room beneath its edge.

For the frame, you get metal in a clear coat finish. This option puts vinyl at the seat. A closer look adds 500 lb as the stated load limit, 24 lb listed for the piece itself, armrests on either side, and padding on the backrest to the picture. Pick a pick of 5 choices for standard vinyl, including Regal Black, London Tan, and Gunmetal to build your version.

Check where the chair goes during sweeping and mopping. If you plan to stack it, first confirm that the model allows stacking. Keep this choice in a cafe plan before moving to the next item. Upholstery selections add build time, so make those choices early.

Add the following to the closing clean. Wash vinyl gently with mild soapy water. Dry it, keeping bleach and solvent cleaners off it. Deal with chips in the metal coating early, before water gets under the surrounding finish.